ProfiTAP F1L-MOD | LC Fiber TAP Module

ProfiTAP 1-Link LC Fiber Optic TAP Module, 1-100 Gbps, 50/50 to 70/30 split, multimode/singlemode, up to 24 per modular chassis

SKU: F1L-MOD Categories: , Tags: ,

Key Features
LC Fiber Optic Modules use LC connectors with low insertion loss zirconia sleeve adapters, and are available in Single-Mode (1310/1550nm 9/125μm) and Multi-Mode (850/1300nm 50μm and 62.5μm), with split ratios ranging from 50/50 to 70/30.

  • Diode function protects network against light insertion from TAP ports (>35 dB insertion loss on TAP port input blocks all signal)
  • Non-intrusive in-line monitoring
  • Permanent network link guaranteed
  • Monitoring of all OSI layers
  • No packet loss
  • No point of failure
  • Passive, unpowered
  • Various split ratios available
  • 10-year warranty
  • Up to 24 modules in one 1U modular chassis AMC-1U

Datasheet

ProfiTAP F1L-MOD Datasheet

Ordering Information

Part Number Variant
F1L-MOD-U-50 Multimode, 1 Gbps, 50/50 split ratio
F1L-MOD-U-60 Multimode, 1 Gbps, 60/40 split ratio
F1L-MOD-U-70 Multimode, 1 Gbps, 70/30 split ratio
F1L-MOD-Z-50 Multimode, 1–100 Gbps, 50/50 split ratio
F1L-MOD-Z-60 Multimode, 1–100 Gbps, 60/40 split ratio
F1L-MOD-Z-70 Multimode, 1–100 Gbps, 70/30 split ratio
F1L-MOD-S-50 Singlemode, 1–100 Gbps, 50/50 split ratio
F1L-MOD-S-60 Singlemode, 1–100 Gbps, 60/40 split ratio
F1L-MOD-S-70 Singlemode, 1–100 Gbps, 70/30 split ratio
Manufacturer

Connector Type

Split Ratio

50/50, 60/40, 70/30

Recommended Products