CREDO HiWire LP SWITCH AEC | 50G/100G QSFP28 to 2x50G/100G QSFP28 Active Electrical Cable (AEC)

CREDO HiWire LP SWITCH AEC, 50G/100G QSFP28 to 2x 50G/100G QSFP28 Active Electrical Cable, 32AWG, 0.5m-2m length

SKU: CAC1xx321P2P-A2-MS Categories: , Tags: ,

Key Features

Designed to enable Network Managed NIC-to-Dual TOR connectivity in an Active/Standby configuration.
HiWire SWITCH AECs are commonly used in NIC-to-TOR applications.

  • Fully NOS Managed
  • Upstream support in SONiC
  • Automatic/Manual Failover at <1ms
  • Full observability and control from all cable ends
  • AN/LT on all cable ends

Description

Credo’s HiWire™ LP SWITCH Active Electrical Cable (AEC) is designed to support hot failover of a server Network Interface Card (NIC) to two top of Rack (TOR) switches to avoid a failed TOR causing a full rack failure.

Credo’s HiWire LP SWITCH AEC is designed to support 100G and 50G NIC cards and provide automatic or manual switching functions without loss of link in less than 1ms. This allows TORs to be brought down for maintenance or firmware updates without impacting server SLAs or even requiring end-user notification. Credo’s HiWire LP SWITCH AECs comply with the QSFP MSA and are simple and easy to use.

Downloads

Ordering Information

Part Number Variant
CAC105321P2P-A2-MS CREDO HiWire LP SWITCH AEC, 50G/100G QSFP28 to 2x 50G/100G QSFP28 Active Electrical Cable, 32AWG, 0.5m length
CAC11X321P2P-A2-MS CREDO HiWire LP SWITCH AEC, 50G/100G QSFP28 to 2x 50G/100G QSFP28 Active Electrical Cable, 32AWG, 1m length
CAC115321P2P-A2-MS CREDO HiWire LP SWITCH AEC, 50G/100G QSFP28 to 2x 50G/100G QSFP28 Active Electrical Cable, 32AWG, 1.5m length
CAC12X321P2P-A2-MS CREDO HiWire LP SWITCH AEC, 50G/100G QSFP28 to 2x 50G/100G QSFP28 Active Electrical Cable, 32AWG, 2m length
Manufacturer

Cable Type

Connector Type

Data Transfer Rate

,

Cable Length

0.5 Meters, 1 Meter, 1.5 Meters, 2 Meters

Temperature Range