Key Features:· Wire-speed performance from both network ports concurrently· Firmware-controlled stateless offloads· 2 million hour MTBF (500 FIT)· Includes Myricom Sniffer10G™ technology offers the best price/performance packet capture and injection solution for security appliances and applicationsHost Interface:· PCI Express Gen2 (5GT/s) X8 lanes· Low power· SFP+ cagesStateless offloads· IP and TCP checksum offload, send and receive· TSO (TCP Segmentation Offload, also known as Large Send Offload)· LRO (Large Receive Offload)· RSS (Receive-Side Scaling)· Interrupt Coalescing· Multicast filteringBenefits· Increased throughput performance and low host-CPU utilization achieved with stateless offloads· SFP+ sockets for 10GBase-SR and LR modules, as well as cost-effective Direct Attach copper* and EOE cables.ThroughputSniffer10G provides 100% lossless packet capture and injection for all Ethernet packet sizes. Supports the maximum possible 10G packet rate of 14.88 million packets per second. LatencySniffer10G adaptive packet coalescing enables very low latency during normal traffi c conditions and limits actual latency during extreme traffi c conditions. The worst case latency for standard (1500 byte) frames is 4 microseconds.TimestampingSniffer10G supports Arista Networks DANZ time stamping which enables the Arista 7150S switch hardware to time stamp every packet. This maximizes analysis accuracy and resolution by placing the time stamp closest to the actual traffi c path, removing queuing and jitter typical in multiple input analysis networks. Sniffer 10G also operates on Myricom’s Timecode Enabled Network adapters which are fully compatible with IRIG-B00X time formats and provide precision time stamping capability independent of the Ethernet network.Operating SystemSupport for all major Linux distributions as well as Windows 2008R2 and newerGPU / Third-Party Accelerator SupportSniffer 10G enables registration of the Sniffer 10G zero-copy data ring to better interoperate with third-party accelerators such as NVIDIA’s GPU platforms. Applications using NVIDIA’s CUDA API can transfer Sniffer10G data to the GPU without an intermediate host copy, reducing host CPU overhead.Software SupportThe Sniffer10G packet capture capabilities can be leveraged through the popular libpcap (Linux) or WinPcap (Windows) library or directly through the Sniffer10G SNF API, which is available as a set of C programming language functions. Using a SNF-aware libpcap/WinPcap, users reference a Myri-10G network adapter through its Ethernet interface name and then can run existing libpcap/WinPcap-dependent applications, relying on libpcap/WinPcap’s portable interface. For more advanced usage, the SNF API can be directly targeted by user applications. In both usage cases, network access via the SNF interface to the Myri-10G network adapter, rather than via the standard kernel access, provides higher performance.
Myricom 10G-PCIE2-8B2-2S+SNF3 | 2x 10G SFP+ Packet Capture Card
Myricom 2x 10GbE SFP+ low-profile NIC, PCIe Gen2 x8, SFP+ cage, incl. SNF3 license, sup. for SFP+ SR, LR, LRM & DAC cables, no optics incl.
Finisar FTLX8574D3BCL | 10G SR SFP+ TransceiverFinisar 10GbE SR multimode SFP+ Transceiver, 10GBASE-SR/SW, 850nm VCSEL, 0°C to 70°C, LC, 400mRead more
Finisar FTLX1475D3BCL | 10G LR SFP+ TransceiverFinisar 10GbE LR singlemode SFP+ Transceiver, 10GBASE-LR/LW, 1310nm DFB, -5°C to 70°C, LC, 10kmRead more