Fiberblaze/Silicom Denmark FBC2CGG5HH-2X40G

Fiberblaze 2x QSFP28 (2x 40GbE) Capture Card, Full Filter, based on Xilinx UltraScale+ KU15P, 1/2 height, 1/2 length, PCIe Gen 3 x16

SKU: FBC2CGG5HH-2X40G Categories: , Tag:

The Silicom fb2CGg5 offers network connectivity and capture to host memory with zero packet loss and with hardware packet processing. The 2xQSFP28 slots allow link speed support for 2x100GE/50GE/40GE/25GE and
8x10GE. The fbC2CGg5 card is based on cutting edge Xilinx FPGA technology in the Kintex UltraScale+ series, providing packet filtering, advanced processing, traffic management, load balancing and host offloading mechanisms.

Network Interface
· IEEE standard: IEEE 802.3 10GE, 40GE, 25GE, 50GE, 100GE
· Support Forward Error Correction (FEC) on 100GE
· Physical interface: 2 x QSFP28 slots
· 10GE supported through break-out cable assemblies.
· 2×25 SFP28 through QSA28 adaptor
· Supported QSFP28 modules (25GE/100GE)
SR4, LR4, PSM4, CWDM4/CLR4, CR4 (DAC), ER4
· Supported QSFP+ modules (10GE/40GE)
SR4, LR4, LM4, PSM4/IR4, CWDM4, ER4, ZR4, BiDi, CR4
· Appropriate 4x10GE Break-out modules
· Ethernet PHY directly embedded in FPGA

Host Interface
· Physical bus connector: 16 lane PCIe
· PCIe bus type: 16 lanes PCIe Gen3
· PCIe compliant
· 64 logical channels that can be connected to DMA or egressed to physical output ports

On Board Memory
· On-board buffering for application robustness
· 16 GB 72-bit Error-correcting code (ECC) DDR4 RAM

Performance
· Capture rate (bursts): Line rate (200 Gbps)
· Capture rate (sustained): 107 Gbps to host memory
With secondary connector up to 200 Gbps to host

Latency
· Less than 3.2 μs to host memory
· Less than 3.2 μs from host memory to Tx
· Non-blocking sending, allowing user applications to operate independently

Time Stamping & Sync
· Resolution = 3.2 ns
· Accuracy down to 20 ns
· Daisy chain PPS between multiple cards supported
Via COAX or Card interconnect adapter
· Strict Host based sync available in driver
· PPS synchronization via SMA connector

Configuration
· Dual boot images with automatic fallback to fail-safe image
· Full configuration and firmware upgrades via supplied tools or fbCAPTURE API

Environment
· Full height, ½ length. 111.15 x 167.65 mm with bracket
· Weight: 485 g
· Operating temperature: 0 – 55°C, 30 – 130°F
· Operating humidity: 20 – 80%
· Hardware compliance: RoHS, CE
· Active cooling, with fan sensor
· Passive cooling (option)

Additional Board Support
· fbCAPTURE API
· PF_RING and nTop suite support
· DPDK support
· libPCAP support
· On-board temperature sensors
· On-board multi-color status, Link and Activity LED for ports
· HW prepared for direct Card to Card interconnect and second PCIe slot connection

Datasheet

Fiberblaze/Silicom Denmark FBC2CGG5HH-2X40G Datasheet

Manufacturer