The Silicom fb2CGg5 offers network connectivity and capture to host memory with zero packet loss and with hardware packet processing. The 2xQSFP28 slots allow link speed support for 2x100GE/50GE/40GE/25GE and 8x10GE. The fbC2CGg5 card is based on cutting edge Xilinx FPGA technology in the Kintex UltraScale+ series, providing packet filtering, advanced processing, traffic management, load balancing and host offloading mechanisms. Network Interface· IEEE standard: IEEE 802.3 10GE, 40GE, 25GE, 50GE, 100GE· Support Forward Error Correction (FEC) on 100GE · Physical interface: 2 x QSFP28 slots· 10GE supported through break-out cable assemblies. · 2×25 SFP28 through QSA28 adaptor· Supported QSFP28 modules (25GE/100GE) SR4, LR4, PSM4, CWDM4/CLR4, CR4 (DAC), ER4· Supported QSFP+ modules (10GE/40GE) SR4, LR4, LM4, PSM4/IR4, CWDM4, ER4, ZR4, BiDi, CR4· Appropriate 4x10GE Break-out modules· Ethernet PHY directly embedded in FPGAHost Interface · Physical bus connector: 16 lane PCIe· PCIe bus type: 16 lanes PCIe Gen3· PCIe compliant· 64 logical channels that can be connected to DMA or egressed to physical output portsOn Board Memory · On-board buffering for application robustness· 16 GB 72-bit Error-correcting code (ECC) DDR4 RAMPerformance· Capture rate (bursts): Line rate (200 Gbps)· Capture rate (sustained): 107 Gbps to host memoryWith secondary connector up to 200 Gbps to host Latency· Less than 3.2 μs to host memory· Less than 3.2 μs from host memory to Tx · Non-blocking sending, allowing user applications to operate independentlyTime Stamping & Sync· Resolution = 3.2 ns· Accuracy down to 20 ns· Daisy chain PPS between multiple cards supportedVia COAX or Card interconnect adapter· Strict Host based sync available in driver· PPS synchronization via SMA connectorConfiguration· Dual boot images with automatic fallback to fail-safe image· Full configuration and firmware upgrades via supplied tools or fbCAPTURE APIEnvironment· Full height, ½ length. 111.15 x 167.65 mm with bracket· Weight: 485 g· Operating temperature: 0 – 55°C, 30 – 130°F· Operating humidity: 20 – 80%· Hardware compliance: RoHS, CE· Active cooling, with fan sensor· Passive cooling (option)Additional Board Support· fbCAPTURE API· PF_RING and nTop suite support· DPDK support· libPCAP support· On-board temperature sensors· On-board multi-color status, Link and Activity LED for ports· HW prepared for direct Card to Card interconnect and second PCIe slot connection
Fiberblaze/Silicom Denmark FBC2CGG5-2X40G
Fiberblaze 2x QSFP28 (2x 40GbE) Capture Card, Full Filter, based on Xilinx UltraScale+ KU15P, 1/2 length, PCIe Gen 3 x16