Fiberblaze/Silicom Denmark FB4CGG3@VU080-2-00-1A

The fb4CGg3@VU/VU+ series is a high performance OEM hardware platform intended for 10/40/25/50/100 Gigabit Ethernet via its quad QSFP28 slots.

Network Interface
· IEEE standard: IEEE 802.3 10/40/25/100 GE
· Physical interface: 4 x QSFP28 ports 2 port variant available
· Supports QSFP+/QSFP28 modules: including fan-out modules for
4x10G/4x25GE per slot, Multimode SR4 (850nm), singlemode LR4 (1310nm),
singlemode PSM4 (1310nm), multimode LRM4 (1310 nm), or Direct Attached Copper (Twinax) and others
· Data rate: 16×10, 4×40, 16×25, 4×100 Gbps

Host Interface
· Physical bus connector: 16-lane PCIe
· PCIe bus type: 1-16 lane PCIe Gen1/Gen2/Gen3

Configuration
· 16-bit fast parallel programming interface from supporting preprogrammed controller
· Configuration flash supports two boot images with automatic fallback to fail safe image if first image fails
· Upload of FPGA configuration to flash via PCIe
· Support for encrypted FPGA bit file (optional)

On-Board Memory
· 2 x 64-bit DDR4@2400MT/s 4 GB
· 2 x Optional SODIMM
64-bit DDR4 @2400MT/s 4 GB
36-bit QDRII+ @1266MT/s 288 Mb
36-bit SQIVe/QDRIV @1600MT/s 288 Mb
· 8 MB user configurable space in flash RAM for permanent storage
· 256 MB Configuration flash RAM for boot images

On-Board Clock
· PCIe clock: 100 MHz
· 200 MHz clock
· 50 MHz clock
· 161.13 MHz clock

Environment
· Physical dimensions: 3/4 length, standard height PCIe
· Power consumption: <10W with uninitialized FPGA
· Operating temperature: 0 – 55°C, 30 – 130°F
· Operating humidity: 20 – 80%
· Hardware compliance: RoHS, CE
· Active cooling (heat sink with fan)
· Passive cooling (optional)

Additional Board Support
· On-board power and temperature sensors
· Board status LED
· User configurable dual color LED
· FPGA controlled Link and Activity LED for each port
· PPS clock synchronization connector

Datasheet

Fiberblaze/Silicom Denmark FB4CGG3@VU080-2-00-1A Datasheet